Skip to content
CALL THE HANGAR DOOR EXPERTS! 772-283-8800

News

How do you seal a bifold door?

by Mark MacDonald 04 Dec 2023

Bifold doors are a popular choice for hangars, garages, and various industrial spaces due to their efficient use of space and quick, reliable operation. Ensuring these doors are properly sealed is crucial for maintaining climate control, energy efficiency, quality of the contents, and overall security. But how do you do that? Fear not: in this post, we'll walk through the steps to effectively sealing a bifold door, providing you with the knowledge needed to enhance the functionality and longevity of your door.

Before delving into the sealing process, it's essential to understand the mechanics of bifold doors so you know why they need to be sealed the way they do. These doors consist of multiple panels hinged together, allowing them to fold horizontally. Bifold doors are renowned for their space-saving design, making them ideal for areas where traditional swinging doors may be impractical.

Bifold doors neatly fold away, maximizing available space. They open and close swiftly, allowing for efficient access. They are suitable for various applications, from hangars to residential garages. All this being said, sealing them effectively is of utmost importance.

Before sealing, carefully inspect the door for any damages or wear. Clean the surfaces, removing any dust, debris, or old sealant. A clean surface ensures better adhesion of the new seal.

Additionally, selecting the appropriate sealant is crucial. Consider factors such as the door material, the climate in your region, and the specific areas that need sealing. Common sealant types include silicone, weatherstripping, and adhesive-backed foam tape. For the sides and top of the door frame, weatherstripping is a highly effective choice. Measure the dimensions accurately and cut the weatherstripping to fit. Apply it along the edges, ensuring a snug fit when the door is closed.

The bottom of the bifold door is a critical area for sealing. Here, you can use a variety of options, including a door sweep or a threshold seal. Install the chosen seal at the bottom of the door, creating a barrier against drafts, pests, and moisture.

After applying the seals, carefully test the bifold door. Ensure that it opens and closes smoothly without any obstruction. Make necessary adjustments to the seals if needed. And know that sealing is not a one-time task; be sure to periodically inspect the seals for wear and tear. Replace any damaged seals promptly to maintain optimal performance.

How to Replace a Bifold Hangar Door Weather Seal, Step by Step

On most hangar doors, the rubber weather seal is held against the door by a retainer strip and screws. Replacing it is a job most owners can do with hand tools.

  1. Measure the old seal first. Record its thickness and width before you remove it. Our guide to choosing EPDM weather seal thickness explains how to pick a replacement.
  2. Close the door and lock out power. The door should not be able to move while you work on it.
  3. Remove the retainer strip. Back out the screws, pull the strip and peel the old seal away. Keep the strip if it is straight and free of corrosion.
  4. Clean the mounting surface. Scrape off old rubber and rust so the new seal sits flat.
  5. Cut the new seal to length. Leave a little extra at each end and trim it after the seal is fastened.
  6. Fasten the seal. Set the seal in place, lay the retainer strip over it and fasten with self-tapping screws, using the old hole spacing as a guide.
  7. Cycle the door and check contact. The seal should touch along its full length without bunching or dragging.

Hangar Door Parts stocks EPDM weather seal for bifold doors, retainer strips and Tek 5 self-tapping screws.

New seal on and the door still leaks or drags?

Our Hangar Door Repair Guide matches what your door is doing to the part that fixes it.

Open the Repair Guide

Frequently Asked Questions

How do you seal the bottom of a bifold hangar door?

Use a rubber weather seal where the door meets an even floor, and a brush seal where the gap varies. Many doors use both.

Which thickness of weather seal should I order?

Match the seal you are replacing. Measure its thickness and width before you remove it, because the profiles are not interchangeable.

Can I replace a bifold door weather seal myself?

Usually, yes. Seals are fastened with a retainer strip and screws, so the job needs only hand tools. Lock out power to the door before you start.

Sealing a bifold door can be a meticulous process. It demands quality materials and expert guidance, but the payoff will be absolutely worth it. At Hangar Door Parts, we pride ourselves on being industry leaders in hangar door parts and installation. With years of experience, our team possesses the expertise to guide you through the sealing process, ensuring lasting results. We offer a range of high-quality seals and parts designed for durability and optimal performance of your bifold door.

Why wait? Enhance the efficiency and longevity of your bifold door by sealing it effectively today. Contact Hangar Door Parts for top-notch products and expert guidance for all your hangar door needs!

Prev Post
Next Post

Thanks for subscribing!

This email has been registered!

Shop the look

Choose Options

Edit Option
Back In Stock Notification
this is just a warning
Login
Shopping Cart
0 items