Skip to content
CALL THE HANGAR DOOR EXPERTS! 772-283-8800

News

7 Industries That Benefit From Heavy-Duty Brush Door Seals

by David Ward 13 Nov 2026

Large doors are hard to seal. Frames shift, tracks wear, and the gap around the opening is rarely the same width from one corner to the next. A brush seal handles that kind of gap well, because its flexible bristles close the space while still letting the door move freely. That is why brush door seals show up on working buildings in very different industries, from aircraft hangars to machine sheds.

Hangar Door Parts organizes its catalog by part, by door type and by the industry the door works in, because a door on a coastal marina faces very different conditions than a door on a farm. Below are seven industries that benefit from brush door seals, what each one is trying to keep out, and how to choose the right seal for the opening.

What a Brush Door Seal Does

A brush seal is made of two parts: the brush insert and the retainer, also called the holder, that fastens it in place. The brush seals Hangar Door Parts sells by the length use a flexible strip of densely packed nylon bristles on an aluminum backing strip, which can be mounted onto the door frame or onto the door itself.

Installed around a door opening, a brush seal helps limit:

  • Dust and debris
  • Drafts and wind
  • Moisture
  • Insects, rodents and birds
  • Heat loss or gain through the gaps around the door

Brush seals also close gaps that rigid seals miss. A rubber weather seal works best against a clean, even surface. A brush seal is the better answer for irregular gaps, and many buildings use both.

Seven Industries That Rely on Brush Door Seals

1Aviation: FBOs, Corporate Hangars and Maintenance Facilities

When a hangar door has gaps, everything inside is exposed to what blows across the ramp. Brush seals help reduce the drafts, dust, moisture and insects that find their way in around the door.

Aviation is also where door type matters most. Hangar doors are bifold, hydraulic or rolling, and parts rarely cross over between the three, so confirm which type you have before ordering. Hangar Door Parts stocks brush seals along with the other replacement parts for aircraft hangar doors that FBOs, corporate hangars and maintenance facilities depend on.

2Marinas and Waterfront Storage

Dry-stack storage buildings, boathouses and seaplane hangars sit in one of the hardest environments a door can face. Salt spray, humidity and UV attack fasteners, bearing races and seal edges.

Waterfront buildings also tend to have older frames that have shifted over the years. A brush seal closes the gaps that open up as a frame moves. If you manage a waterfront building, inspect the leading edge of the weather seals and the hardware on the lowest leaf first, then review the seals, bearings and hardware for marina hangar doors before the next season.

3Agriculture: Machine Sheds, Equipment Storage and Livestock Buildings

Agricultural doors run in dust, chaff, moisture and pests, and downtime costs the most during planting and harvest. Brush seals are a practical way to keep birds, rodents and insects out of a machine shed or feed storage, because they close the uneven gaps a rigid seal leaves open.

The key is sizing the brush to the largest gap around the door. Many farm buildings pair a weather seal on the clean, even edges with a brush seal everywhere else. Both are available with the brush seals, weather seals and bearings for agricultural doors.

4Private Hangars and Hangar Homes

A private hangar door may only open a couple of times a month. That sounds easy on the door, but seals degrade with time and UV, not just with movement. A door that sits still for weeks does not wear out so much as dry out.

For a hangar home that is heated or cooled, a perimeter weather seal plus a brush seal at the gaps handles most of the air loss. On a bifold door, the bottom edge and the joint between the leaves lose the most air, so start there. Seals and brush seals are also among the residential hangar door parts an owner can replace with hand tools.

5Warehousing and Storage

Roll-up doors are common in warehouses and storage facilities, and every gap around them lets dust and pests into the storage space. Sealing the top and both sides of the door helps keep the building cleaner and protects what is stored inside.

This is the application the Hangar Door Parts brush seal kits for roll-up, coiling and sectional steel doors are sized for. Each kit comes with the brush, the holders and self-tapping screws for one standard opening.

6Manufacturing and Industrial Shops

Shops and manufacturing buildings ask a lot from a door seal. The doors cycle often, and the environment around them can be harsh. The same brush seal kits used on warehouse doors go on the roll-up, coiling and sectional steel doors in these buildings.

A sealed opening also helps improve energy efficiency and protects the interior from outside contaminants. For a production floor that is heated or cooled, closing the gaps around each door is one of the simpler upgrades to make.

7Fire Stations and Commercial Equipment Bays

Commercial doors take heavy daily cycling. A door that opens many times a day builds up more wear in a month than a private hangar door does in a year, and when that door fails, it often blocks the only opening big enough to matter.

For these buildings, seals belong on the maintenance schedule. Check the seal contact along the door edge at the same time you check limit switches, the e-stop and bearing lubrication, and base the inspection interval on how often the door cycles. Hangar Door Parts groups the wear parts for high-cycle industrial and commercial doors in one place for warehouses, fire stations and equipment bays.

How to Choose the Right Brush Seal for Your Building

Match the Seal to the Door

Brush seal kits from Hangar Door Parts are sized for roll-up, coiling and sectional steel doors. They seal the top and the two sides of the opening. The bottom edge is handled separately.

For bifold, hydraulic and rolling hangar doors, Hangar Door Parts also sells brush seal by the length. Any brush and holder size can be used, as long as it fits the gap and the door.

Match the Brush to the Gap

Kits come in three configurations:

2 inch brush

For even, modest gaps all the way around.

3 inch brush

A medium-duty brush for older frames, worn tracks or wide gaps on every edge.

3 inch top brush with 2 inch sides

For a larger header gap with tighter side clearance.

The brush has to close the gap with some deflection left over. Too much deflection wears the bristles early, and too little means the seal does nothing.

Measure the Opening

Measure the opening the door closes against, not the door panel. The brush length you need works out to the width plus twice the height, so a door 10 feet wide by 8 feet tall takes 26 feet of brush.

Brush length needed

Width + (2 x Height)

Example: a 10 ft wide by 8 ft tall door takes 26 ft of brush.

Kits are sized to eight standard openings, from 8 feet by 8 feet up to 20 feet by 20 feet. Each one includes 45 degree holders for the sides, straight holders for the top and a pack of Tek 5 self-tapping screws. If your opening falls between two sizes, order up and trim to fit.

Frequently Asked Questions

Do I need a brush seal or a weather seal?

Often both. A weather seal works best on clean, even surfaces. A brush seal is the better choice for irregular gaps, dust and pests. Many buildings use a weather seal on the even edges and a brush seal where the gap varies.

Do brush seal kits seal the bottom of the door?

No. The kits seal the top and the two sides of the opening. The bottom edge is handled separately.

Will a brush seal kit fit a bifold or hydraulic hangar door?

The kits are sized for roll-up, coiling and sectional steel doors. For bifold, hydraulic and rolling hangar doors, order brush seal by the length and confirm your door type first. If you are not sure what you have, send the Hangar Door Parts team a photo of the door and they can help identify the right parts.

Find the Right Brush Seal for Your Industry

Whether the building is a corporate hangar, a boathouse, a machine shed or a busy warehouse, the goal is the same: close the gaps around the door without getting in the way of how it moves. Hangar Door Parts brush seal kits are manufactured and warehoused in Florida and shipped worldwide.

Shop Brush Seal Kits

Not sure which seal your door needs? Contact the Hangar Door Parts team with your door type, your opening size and a photo, and we will help you find the right parts.

Prev Post
Next Post

Thanks for subscribing!

This email has been registered!

Shop the look

Choose Options

Edit Option
Back In Stock Notification
this is just a warning
Login
Shopping Cart
0 items